Changing pre-set options

Option Adjustment mode

After using your AquaSmart™ you may want to fine tune some of the options to suit your wash needs.

There are a number of preset options, which can be altered.

The wash temperatures.

The rinse option.

Changing the cold wash to Controlled Cold.

The number of beeps at the end of the cycle.

The Out of Balance recovery routine.

Resetting the washer back to the settings it left the factory with.

To enter Option Adjustment mode

1 Turn the washer on at the wall but do not press POWER. Press START/PAUSE and hold down, then press POWER.

You will hear two quick beeps and the machine will show an unusual pattern of lights. Pages 21–24 explain the different options in more detail.

2Use the buttons on the panel to make your changes to the pre-set options.

3Press POWER to return to normal mode.

4 Your AquaSmart™ will automatically remember your changes.

Fig.14 Press START/PAUSE and hold down, then press POWER

Page 22

Image 22

Fisher & Paykel WL70T60D, WL80T65D installation instructions Changing pre-set options, To enter Option Adjustment mode

Contents

Installation instructions and user guide Contents Introduction Welcome to AquaSmart Unpacking Installation instructionsInstallation Drain hose Inlet hoses Installation instructionsWater supply Electrical Accessories and spare parts Clothes washer safetyLevelling your machine AquaSmart water consumption Before you do your first washAquaSmart capacity Getting started quickly Detergent Getting started quickly Unique AquaSmart wash High Efficiency modeConventional mode Detergent Activating wash Fully automatic water level Sorting and loadingSorting and loading Sorting Loading Choosing the right detergent Where do I put my detergent?Detergent How much detergent? Choosing the right cycle Cleaning the dispenserFabric softener Adding the fabric softener Heavy Changing the wash cycle optionsWash cycles explained Regular Delicate Wash cycles explained Sheets Colours Wash cycles explained Easy Iron Wash cycle options explained Soak Delay StartWash Advance Lid lock Auto drainTo unlock the lid at any time press START/PAUSE Customising the wash cycles To customise a cycle To enter Option Adjustment mode Option Adjustment modeChanging pre-set options Wash temperatures Controlled Cold Aqua Rinse End of Cycle beeps Automatic Recovery option Out-of-Balance recovery routineReset Back to Factory Settings Machine Stops option Control Panel Lighting Cleaning the soft touch buttons and topdeck When you have finished the cycleCleaning your AquaSmart Cleaning the inside of your washer Automatic lint disposal system Cleaning your low profile agitatorNappy sanitisers/bleach ABC washing guide Damp Items Drying. Advance cycle to Spin using the Advance buttonHottest setting in the dryer that the fabric will handle Duvet/Doona Inners Nappies Colour lossLingerie Sensitive Skin Tea Towels TableclothsSuch as table cloths. Choose Sheets cycle Throws Choose Bulky cycle Towels Musical series of beeps every 5 seconds and… HOT and Cold water temperature lights are both flashingHOT water temperature light is flashing Spin Speed and the Rinse or Spin light is flashing Before you call for service Solving operating problems Wash Cycle Time longer than usual Small amount of Water in Bowl AT END of Cycle Solving wash problems Black or Gray Marks on Clothes This warranty does not cover Manufacturer’s warrantyFisher & Paykel undertakes to Australia if you need assistance Customer careNew Zealand if you need assistance Product details Model/Serial No NZ AU

Fisher & Paykel WL70T60D, WL80T65D Changing pre-set options, Option Adjustment mode

Models: WL80T65D WL70T60D