Battery Installation

H
IMPORTANT! Use only a Power Wheels®12 volt battery.
Use of any other battery will damage your mini-bike. Make
sure that you charge the battery for at least 18 hours using
the enclosed Power Wheels®12 volt charger before
operating your mini-bike for the first time. Charge the
battery for at least 14 hours after each use of the mini-bike.
Never charge the battery longer than 30 hours. Failure to
follow these instructions may damage your battery and will
void your warranty.
• While pushing the release button on the battery
compartment cover, lift it from the mini-bike.
• Plug the motor harness connector into the battery socket.
Push firmly to make sure the motor harness
connector is completely inserted into the battery.
• Lower the battery into the battery compartment.
• At an angle, insert the front tab on the cover into the slot
in the mini-bike floor.
• Push down on the cover to “snap” it into place.
14
1
3
2
Battery
Compartment
Cover
Motor Harness
Connector
12 Volt Battery
PUSH
Release
Button
Tab