|
| Assembly |
8 |
| 9 |
Foot Peg | Bar | Foot Peg |
Rounded Edge | • While holding the lock nut with an adjustable wrench | |
| (or a 7/16" wrench), tighten the bolt with the Allen wrench. | |
| Do not | |
19/16" Bolt - 2 | • Check to be sure the foot peg is securely attached. | |
Push and pull it. It should not move. If it does move, | ||
7/16" Lock Nut - 2 | ||
tighten the bolt a few more turns with the Allen wrench. | ||
BOTH SHOWN ACTUAL SIZE | • Repeat steps 8 and 9 to fasten the other foot peg to the | |
| bar with a 19/16" bolt and 7/16" lock nut. |
•Fit a foot peg to the end of the bar on the bottom of the
•Turn the foot peg to align the hole in the foot peg with the hole in the bar.
•Insert a 19/16" bolt through the front hole in the bar, the foot peg and out the back hole in the bar.
•Attach a 7/16" lock nut (rounded edge outward) to the end of the bolt and
9
