| Problems & Solutions | |
|
|
|
Problem |
| Solution |
Transmitter range indicator |
| Receiver is out of range of transmitter. Move receiver closer to transmitter. |
light flashes |
| Note: Range varies depending on surrounding conditions such as noise |
|
| levels, physical obstructions and signal interference. |
|
|
|
|
| Transmitter power is off. Turn transmitter power on. |
|
|
|
|
| Channel switches are on different channels. Make sure channel switches |
|
| on both transmitter and receiver are set to same channel. |
|
| Loose power cord connection and transmitter power is off. Check |
|
| transmitter power cord |
|
|
|
|
| No power to wall outlet and transmitter power is off. Make sure light |
|
| switch that controls power flow to wall outlet is on. |
|
|
|
|
| Power is off because circuit breaker for room is off. Make sure house |
|
| fuses and circuit breakers are on. |
Receiver power indicator does |
| Receiver power is off. Turn receiver power on. |
not light |
|
|
| Batteries in receiver are weak or dead. Replace all batteries with three | |
|
| |
|
| “AAA” (LR03) alkaline batteries or use the AC adaptor as a power source. |
|
|
|
|
| Power is off because circuit breaker for room is off. Make sure house |
|
| fuses and circuit breakers are on. |
|
|
|
|
| No power to wall outlet and power is off. Make sure light switch that |
|
| controls power flow to wall outlet is on. |
Receiver low battery indicator |
| Batteries in receiver are weak or dead. Replace all batteries with three |
light flashes |
| “AAA” (LR03) alkaline batteries or use the AC adaptor as a power source. |
|
|
|
Transmitter power L.E.D. |
| Transmitter power is off. Turn transmitter power on. |
does not light at all |
|
|
| Loose power cord connection and transmitter power is off. Check | |
|
| |
|
| transmitter power cord |
|
|
|
|
| No power to wall outlet and transmitter power is off. Make sure light |
|
| switch that controls power flow to wall outlet is on. |
|
|
|
|
| Power is off because circuit breaker for baby’s room is off. Make sure |
|
| house fuses and circuit breakers are on. |
|
|
|
You can hear conversations or |
| There is signal interference due to other nursery monitors on same |
sounds from other homes |
| channel or cordless telephone use. Change channel switches on both |
|
| transmitter and receiver to eliminate source of interference. |
Hint: If, after checking all of these solutions, you believe that your transmitter power cord or AC adaptor are damaged, please contact
22