ASSEMBLY
Step 20 is for SINGLE ACTION MODE.
FIGURE 9
Step 20. Lower SLOT in
CONNECTING ARMS (23
RIGHT & 24 LEFT) onto
LOCKOUT ROD and slide
RETAINER (28) back over
LOCKOUT ROD to lock
CONNECTING ARM in
SINGLE ACTION MODE.
FIGURE 9
28
RETAINER
LOCKOUT
ROD
23
RIGHT
CONNECTING
ARM
NOTE: There are three ADJUSTMENT HOLES in each CONNECTING ARM (23 & 24). The CONNECTING ARM comes attached to the END HOLE. The END HOLE puts the GRIP end of the HANDLEBARS (21 & 22) closer to you, which is better for shorter people. The INSIDE HOLE puts the GRIP end farther away from you which is better for taller people. To adjust, follow Steps 21 through 23.
21 RIGHT | 29 | |
HANDLEBAR | ||
HAIRPIN | ||
| ||
| COTTER | |
23 |
| |
RIGHT |
| |
CONNECTING | 4 | |
ARM | ||
M8 | ||
| ||
| WASHER |
|
| INSIDE |
|
| HOLE |
| PIVOT | END |
FIGURE 10 | HOLE | |
PIN |
| |
|
|
FIGURE 10
Step 21. Remove HAIRPIN COTTER (29) and M8 WASHER (4) from PIVOT PIN in HANDLEBAR (21 RIGHT & 22 LEFT).
Step 22. Slide desired ADJUSTMENT HOLE, of CONNECTING ARM (23 & 24) onto PIVOT PIN of HANDLEBAR (21 & 22).
Step 23. Place M8 WASHER (4) over PIVOT PIN and insert HAIRPIN COTTER (29) through hole in PIVOT PIN to lock
in place.
9
