ASSEMBLY
FIGURE 6
Step 16. With PIVOT TUBES on REAR side of HANDLEBARS (21 RIGHT and 22 LEFT) and CONNECTING ARMS (23 RIGHT and 24 LEFT) to inside, slide HANDLEBARS onto AXLE.
(Remove tape at AXLE TUBE area).
Step 17. Slide LARGE WASHER (25) onto end of |
|
AXLE and carefully tap PUSH NUT (26) | 25 |
onto end of AXLE with hammer. | LARGE |
| WASHER |
FIGURE 6
23
RIGHT
CONNECTING
ARM
22 |
LEFT |
HANDLEBAR |
PIVOT
TUBE
ON REAR
SIDE
AXLE
26
PUSH NUT
21
RIGHT
HANDLEBAR
Steps 18 and 19 are for DUAL ACTION MODE.
FIGURE 7
Step 18. Lower SLOT in CONNECTING ARMS (23 & 24) down over PEDAL BUSHING (8).
FIGURE 8
Step 19. Slide RETAINER (28) until CONNECTING ARMS (23 & 24) are locked in DUAL ACTION MODE.
|
| 28 |
| SLOT | RETAINER |
|
| |
| 28 | 23 |
| RETAINER | |
|
| RIGHT |
|
| CONNECTING |
8 |
| ARM |
|
| |
PEDAL |
|
|
BUSHING |
|
|
| 23 |
|
| RIGHT |
|
FIGURE 7 | CONNECTING | FIGURE 8 |
ARM |
8
