Fitness Quest 386da manual Assembly, Please Read ALL Instructions Carefully Before Assembling

ASSEMBLY

Occasionally our products contain components that are pre-lubricated at the factory. We recommend that

you protect flooring, or anything else the parts may contact, with newspaper or cloth.

IMPORTANT

PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING.

FIGURE 1

NOTE: There are two FOOT TUBES. The REAR FOOT TUBE has FOOT CAPS (6) on each end and the FRONT FOOT TUBE has WHEELS (7).

Step 1. Remove the two M8 x 1.25 x 60 CARRIAGE BOLTS (1), M8 WASHERS

(4)and M8 x 1.25 CAP NUTS (5) from the REAR FOOT TUBE (2) with FOOT CAPS (6).

Step 2. Attach FOOT TUBE (2) to rear of FRAME (3) with hardware removed in Step 1. Make sure to insert BOLTS through "square holes" first.

5
M8 x 1.25
CAP	7
NUT
	WHEEL
	4
	M8
	WASHER

3	2
	FRONT
FRAME
	FOOT
	TUBE

1

	6	5
	FOOT
1		M8 x 1.25
	CAP
M8 x 1.25 x 60		CAP
CARRIAGE BOLT		NUT

	2
	REAR
6	FOOT
	TUBE	4
FOOT
CAP	3	M8
	FRAME	WASHER

FIGURE 1

FIGURE 2

Step 3. Remove the two M8 x 1.25 x 60 CARRIAGE BOLTS (1), M8 WASH- ERS (4) and M8 x 1.25 CAP NUTS

(5) from the FRONT FOOT TUBE (2).

Step 4. Attach FOOT TUBE (2) to front of FRAME (3) with hardware removed in Step 3. Make sure to insert BOLTS through "square holes" first.

7

M8 x 1.25 x 60

WHEEL

CARRIAGE BOLT

FIGURE 2

5