USING THE PULSE FUNCTION ON THE HANDLEBARS
The Pulse window on your electronics works in conjunction with the pulse sensors found on the Rear Handlebars. When you are ready to read your pulse:
1)Place both hands firmly on the pulse sensors. For the most accurate reading, it is important to use both hands.
2)Look at your pulse window. The small heart will begin to blink.
3)Your estimated heart rate will appear in the window approximately 6 seconds after you grasp the pulse sensors.
4)Refer to the Target Heart Rate Zone Chart found on page 17 of this manual. For additional information about the importance of working within certain heart rate ranges, see pages
15 and 16 – Measuring Your Heart Rate.
5)This estimate is not exact and persons with medical conditions and/or a specific need for accurate heart rate monitoring should not rely on the estimations provided.
pulse
sensors
rear
handlebar
10
