Fitness Quest Brutus 655 manual

FIGURE 8

Step 36. Attach RIGHT BACKREST CUSHION (31) to RIGHT OBLIQUE FRAME (2) with 3/8” x 2-5/8” HEX BOLTS (53) and 3/8” WASHERS (62).

Step 37. Push 3/4” BUSHINGS (70) into RIGHT BENCH PRESS FRAME (20).

Step 38. Attach PULLEY (76) to RIGHT BENCH PRESS FRAME (20) with 3/8” x 6-1/8” HEX BOLT (59), 3/ 8” WASHERS (62) and 3/8” LOCKNUT (67).

Step 39. Attach RIGHT BENCH PRESS FRAME (20) to RIGHT BASE BEAM (1) with 5/8” x 7-3/4” SHAFT BAR (61), 5/8” WASHERS (65) and 5/8” LOCKNUTS (66).

Step 40. Attach RIGHT PRESS ARM (19) to RIGHT BENCH PRESS FRAME (20) with 3/8” x 3” HEX BOLTS (54), 3/8” WASHERS (62) and 3/8” LOCKNUTS (67).

Step 41. Push 1” ROUND END PLUGS (74) into ends of RIGHT PRESS ARM (19) and slide 2” SQUARE END CAPS (72) over ends.

Step 42. NOTE: Liquid soap applied to RIGHT PRESS ARM (19) will help LONG FOAM GRIPS (84) slide on easier.

Slide LONG FOAM GRIPS onto ends of RIGHT PRESS ARM (19) until flush with end.

20