114, 115, 116, and 117 Calibration Information | Fluke instruction

114, 115, 116, and 117 Calibration Information

Table 4. Calibration Adjustment Steps (cont)

	Rotary			Calibration Steps			Input	Calibrator
	Switch						Input	Calibrator
	Switch		114	[1]	[1]	[1,2]	Terminals	Source Value
				[1]	[1]	[1,2]	Terminals	Source Value
	Position			115	116	117
	Position
	$		N/A	N/A	C/23	N/A	+ and COM	600 μA, 0 Hz
	DC μamps

	[1]	Models listed in this column also refer to the “C” version of the model. For example, model 115 steps are valid for the 115C.
	[2]	Do not calibrate the 117 or 117C with a line-frequency power source nearby (e.g. fluorescent light, power strip, etc.). These devices
		can produce errors in the VoltAlert calibration.
	[3]	Wait an additional 5 seconds after calibrator has settled before pressing g.

16

Image 16

Fluke specifications 114, 115, 116, and 117 Calibration Information

Contents

Service Information Introduction Safety Information XWWarnings and Precautions International Electrical Symbols Specifications General Specifications Accuracy Specifications Function Range Resolution Accuracy Model1 Input Characteristics Basic MaintenanceTesting the Fuse 115 & 117 only Replacing the Battery and Fuse Fuse Testing Performance Tests Cleaning the MeterRequired Equipment Testing the Display Backlight TestKeypad Test Preparing for the Performance Tests Testing Temperature 116 only 000V Testing the VoltAlert Function 117 only Calibration Adjustment Calibration Adjustment Password XW Warning Calibration Adjustment Procedure Meter Buttons Used in the Calibration Steps COM 60 Hz + and COM 600 μA, 60 Hz AC μamps 114, 115, 116, and 117 Calibration Information Replacement Parts Lists the Meter’s replacable parts identified in Figure Replacable Parts List Description Qty Number Warranty 114, 115, 116, and 117 Calibration Information