Fluke 114, 115 International Electrical Symbols, General Specifications, Digital Multimeters

Digital Multimeters

International Electrical Symbols

International Electrical Symbols

Table 1 lists the international symbols that appear in this document and on the Meter.

Table 1. Electrical Symbols

Symbol	Description	Symbol	Description
B	AC (Alternating Current)	I	Fuse
F	DC (Direct Current)	T	Double Insulated
X	Hazardous voltage	W	Important Information; Refer to manual
N	Battery (Low battery when shown on the	J	Earth ground
	display.)
~	Do not dispose of this product as unsorted municipal waste. Contact Fluke or a qualified recycler for
	disposal.

Specifications

Accuracy is specified for 1 year after calibration at operating temperatures of 18 °C to 28 °C, with relative humidity at 0 % to 90 %. Extended specifcifications are available at www.fluke.com.

General Specifications

Maximum voltage between any
terminal and earth ground	600 V
Surge Protection	6 kV peak per IEC 61010-1 600V CAT III,
	Pollution Degree 2

WFuse for A input (115 & 117 only):.................. 11 A, 1000 V FAST 17 kA Fuse (Fluke PN 803293)

Display	Digital: 6,000 counts, updates 4/sec
	Bar Graph: 33 segments, updates 32/sec
Temperature	Operating: -10 °C to +50 °C
	Storage: -40 °C to +60 °C
Temperature Coefficient	0.1 x (specified accuracy)/°C (<18 °C or >28 °C)
Operating Altitude	2,000 meters
Battery	9 Volt Alkaline, NEDA 1604A / IEC 6LR61
Battery Life	Alkaline: 400 hours typical, without backlight
Safety Compliances	Complies with ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 No 61010-1-04, UL 6101B
	(2003) and IEC/EN 61010-1 2nd Edition for measurement Category III, 600 V, Pollution
	Degree 2, EMC EN61326-1
Certifications	UL, P, CSA, TÜV, ; (N10140), VDE
IP Rating (dust and water protection)	IP42

3