Getting Started
Managing Your Network Using Fluke DAQ
Starting a Scan Using Spy
Spy triggers and collects its own measurements from up to eight channels from any combination of devices. The data is not stored and the devices you are checking do not need to be scanning.
To start a Spy scan
1.Click the 
on the Fluke DAQ toolbar. The Spy icon appears in the lowest item in the TreeView panel.
2.Click the Spy icon and the Spy window appears. You may select up to 8 channels, including DIO and totalizer.
alg123s.bmp
3. Click 
to start the scan. Click 
to stop the scan.
53
