Fluke 41B, 39 user manual Configuration Screens

39/41B

Users Manual

3.To exit the screen, press Eto select a highlighted item on the last line and store all selections you have made during this configuration session. The Tester begins normal operation using these selections. The Tester also automatically sets up to these selections at the next power-up.

To exit the screen without making changes, press Eto cycle through all selection lines.

4.To restore the standard configuration, press Ras you press Oon. (On Model 41B, this action also clears waveform memory.)

a16c.eps

Figure 17. Configuration Screens

38