Fostex FD-4 owner manual Manual Punch In/Out, Connecting the instrument and a foot switch

Special Application (Punch In/Out Recording)

Undo/Redo Auto Punch In/Out recording

You can undo or redo Auto Punch In/Out recording. Press the UNDO/REDO key after recording is complete to restore the conditions that existed prior to the recording. Press the UNDO/REDO key again to restore the conditions that existed after the recording. Follow the notes below:

<Note-1>

The Undo/Redo function is effective only when the FD-4 is stopped.

<Note-2>

The Undo/Redo is not effective if you perform one of the following operations after you finish recording:

•When a new recording is made.

•While a new editing is executed (such as Copy & Paste, Move & Paste, or Erase).

•When in theAUTO PUNCH ON mode, when theAUTO PUNCH IN point is passed in the PLAY (or RECORD) mode.

•When the power is momentarily switched off.

•When the program is changed.

•When the disk is ejected.

Manual Punch In/Out

This section explains how to perform Manual Punch In/ Out using a foot switch (optional Model 8051).

You do not need to specify the Punch In/Out points. Instead, you press the foot switch at the Punch In/Out point. Manual Punch In/Out also offers rehearsal and actual takes. You can repeat rehearsal until you are ready.

As an example, replace a part of the recorded guitar solo on track 3.

•Initialize the FD-4.

•Select a desired Program for Punch In/Out.

Preparation

2

3

3

3

3

EQ EQ

1

3

3

3

3

Connecting the instrument and a foot switch

1.Connect the guitar to input jack 1.

2.Connect an optional foot switch (Model 8051) to the PUNCH IN/OUT jack on the rear panel.

46