Fostex FD-4 owner manual Input jacks 1, 2, 3, 4 Connector phone

Names and Functions

Front Panel (Input/Output Section)

12

1 2 3 4

1.Input jacks [1, 2, 3, 4] (Connector: phone)

Connect sound sources, such as musical instruments and microphones, here.

Connect a microphone to input jacks 3 and 4, which are equipped with TRIM switches that allow you to switch according to the connected microphone output level. Input channels 3 and 4 also support balanced XLR connectors on the rear panel.

The phone jacks for input channels 3 and 4 on the front panel have priority. If you connect sound sources to these jacks, the balanced XLR jacks for input channels 3 and 4 on the rear panel will be disabled.

2.Headphone jack [PHONES] (Connector: stereo TRS phone)

Connect headphones here. You can adjust the headphone volume using the MASTER knob in the monitor section.

1 2 3 4

Rear Panel (Input/Output Section)

1 2 3 4 5 6

R MON OUT L R ST OUT L

2 AUX SEND 1

	AUX RTN 2			AUX RTN 1
R		MONO/L	R		MONO/L	4	INSERT 3

INPUT 4 INPUT 3

	SCSI	DATA	DATA	PUNCH	MIDI	MIDI	RECORDER IN
POWER		IN	OUT	IN/OUT	IN	OUT	R	L

			11
15	14	13	12	10	9	8
							7

1. Monitor Out jacks [MON OUT L, R] (Connector: RCA pin)

Connect monitoring speakers and amplifier or powered speakers here. These jacks output signals selected by the SELECTOR in the monitor section (L/R, L/R+MON, or MON). Use the MASTER knob in the monitor section to adjust the output level.

2. Stereo Out jacks [ST. OUT L, R] (Connector: RCA pin)

These jacks output stereo bus L/R signals. Connect these jacks to the input jacks of a master recorder. You can adjust the output level using the master fader L/R.

R ST OUT L

R MON OUT L

18