Fostex FD-4 owner manual Executing the Auto Return function, Press the Locate key

3.Press the LOCATE key.

The FD-4 locates the point and plays as shown in the diagram.

•You can set a preroll time in the [Preroll ?] menu in SETUP mode so that the FD-4 will start playback preroll time before the locate point. You can set the preroll time from 0 to 10 seconds. Refer to the chapter “Changing the Initial Settings (SETUP Mode)” on page 85.

Auto Return

This function allows the FD-4 to play data up to the AUTO RTN END point, then automatically locate the AUTO RTN START point as shown in the diagram below.

To enable this function, AUTO RTN mode should be on and the AUTO RTN START point and AUTO RTN END point should already be set.

<Auto Return operation>
AUTO RTN START point	AUTO RTN END point
Playback
Locate
Stop

Executing the Auto Return function

	1
EQ	EQ
	2
	3

1.Store the AUTO RTN START and AUTO RTN END points.

Refer to the chapter “Storing a Locate Point (Edit Point)” on page 63 for information on storing the desired points in the AUTO RTN START key and the AUTO RTN END key.

Locate Function

2.Press the AUTO RTN/AUTO PLAY key to turn on the [RTN] indicator at the bottom of the display.

AUTO

RTN

3.Start playback a little before the AUTO RTN END point.

The FD-4 operates as shown in the diagram and stops at the AUTO RTN START point.

•You can set a preroll time in the [Preroll ?] menu in SETUP mode so that the FD-4 will start playback preroll time before the locate point. You can set the preroll time from 0 to 10 seconds. Refer to the chapter “Changing the Initial Settings (SETUP Mode)” on page 85.

67