Recorder Functions

Program

The VF80 can have up to 99 programs (P01 through P99) and usually each program manages one song. You can make recording against each program or playback materials recorded on each program.

This section describe program-related operations.

Creating a new program

When formatting a hard disk, a program (P01) is au- tomatically created.

To create a new program, follow the procedure below while the recorder is stopped and the display shows the Normal screen.

<Note>

The initial settings for a new program are copied from the setting of the current program.

Therefore, if you want to make a new program with the same settings as an existing program, bring up the pro- gram before creating a new program.

Note that you may use the program with the tentative title ("#0002" in this example) if you do not need to en- ter the desired one. Anyway, you may also enter/edit the title later by the procedure described in "Editing a program title" on page 62.

To use the program with the tentative title, press the [EXIT/NO] key. To put the desired title, see the following.

<How to enter a desired title>

•Rotate the [JOG] dial (or [CURSOR / ] keys) to select a character for the blinking point from among those listed below.

•Use the [CURSOR / ] keys to move the blinking point.

1

Press the [TRACK EDIT/PGM] key while holding down

 

the [SHIFT] key.

The screen for selecting, renaming or deleting a pro- gram appears. (The screen example below shows the initial condition where only Program 01 exists.)

<Hint>

When selecting a character, rotating the [JOG] dial while holding down the [SHIFT] key jumps among characters surrounded with the box above.

This function will allow you to save time for select- ing a desired character.

2Use the [JOG] dial to highlight "P02 [New Program]" and then press the [ENTER/YES] key.

When highlighting "P02 [New Program]", only high- lighted "SELECT" is shown at the bottom of the screen. Pressing the [ENTER/YES] key creates a new program (P02 in this example) with the tentative title whose leftmost character ("#" in this example) is highlighted. In this condition, you can enter the program title by following the procedure described in "<How to enter a desired title> below.

3

4

Press the [ENTER/YES] key after entering the title.

The title is set.

Press the [EXIT/NO] (or [STOP]) key.

The setup mode exits and the display shows the Nor- mal screen of the newly created program.

<Hint>

•When creating a new program, the next program number to the highest program number in the existing programs is assigned.

If there is only one program (P01), Program 02 (P02) will be created. If there is five programs (P01 through P05), Program 06 (P06) will be created.

•Creating a new program consumes a small amount of the recordable disk space. Also note that when the recordable disk space is not enough, you cannot create a new program.

61

Page 60 Page 62
Page 61
Image 61
Fostex VF80 owner manual Program, Creating a new program, Press the ENTER/YES key after entering the title
Page 60 Page 62

VF80 specifications

The Fostex VF80 is a notable addition to the world of compact digital recording, particularly appealing to musicians, producers, and sound engineers looking for a portable device that doesn’t compromise on quality. This versatile digital multitrack recorder provides a mixture of user-friendly features that make it ideal for both studio and mobile applications.

At the heart of the Fostex VF80 is its 8-track recording capability, which allows users to capture multiple audio sources simultaneously. This is particularly advantageous for band setups or when layering various instruments. The device operates using a 20-bit A/D and D/A conversion for top-notch audio quality, ensuring that each recording is crisp and clear. The VF80 supports both analog and digital inputs, accommodating a variety of equipment, thereby enhancing its versatility.

One of its standout features is the built-in CD-R/W drive, allowing users to easily burn their recordings onto CDs, making it simple to share demos and final mixes. The VF80 utilizes a 10-voice digital mixer with various built-in effects such as reverb and delay, enabling musicians to craft their sound directly on the device without the need for external processing.

The user interface is designed for efficiency, featuring an easy-to-read LCD screen and intuitive controls, which makes navigating through tracks, edits, and settings straightforward. The VF80 also includes a metronome and tuner, essential tools for musicians during recording sessions.

Storage-wise, the Fostex VF80 employs an internal hard drive, ensuring ample space for long sessions and large projects. Accessibility to a broad range of file formats allows for efficient track management and compatibility with computer-based audio editing software.

Included with the device are various input options like standard mic preamps, making it suitable for various recording scenarios, from vocals to instruments. The robust construction of the VF80 ensures it can withstand the rigors of both studio and live environments, making it a reliable choice for professionals.

Overall, the Fostex VF80 merges functionality with portability, making it a fantastic companion for anyone looking to produce high-quality audio recordings without the fuss of intricate equipment setups. Its blend of features makes it an attractive option for both amateurs and seasoned audio professionals alike.
Top Page Image Contents