Franke Consumer Products FCR 708-H TC manual Air Outlet In A Recycling Hood Version

AIR OUTLET IN A RECYCLING HOOD VERSION

•In case the components requested for the recycling functioning have been removed earlier these have to be positioned again.

•Put the plastic tube onto the flange 7.

•Place the air outlet grid 8 on the air outlet. Make sure that the position of the grid is correct.

•Make sure that charcoal filters have been placed inside the hood.

ELECTRICAL CONNECTION

•Connect the hood to the mains through a two-pole switch hav- ing a contact gap of at least 3 mm.

•Remove the grease filters (see paragraph Maintenance) being sure that the connector of the feeding cable is correctly inserted in the socket placed on the side of the fan.

8

7

EN	7
	7