Franke Consumer Products FQD 907 manual Maintenance, Metal grease filters, Remote Control Optional

MAINTENANCE

REMOTE CONTROL (OPTIONAL)

The appliance can be controlled using a remote control powered by a 1.5 V carbon-zinc alkaline batteries of the standard LR03- AAA type.

• Do not place the remote control near to heat sources.

• Used batteries must be disposed of in the proper manner.

Metal grease filters

Filters can be washed in the dish machine. They need to be washed when FF-sign appears on the display or in any case every 2 months, or even more frequently in case of particularly inten- sive use of the hood.

Alarm reset

•Switch off the hood and the lights. If the 24h-function has been activated this has to be deactivated.

•Press the E-key till the display is unlit.

Cleaning the filters

•Pull the comfort panels to open them.

•Remove the filters one by one pushing them towards the back side of the hood unit and simultaneously pulling downwards.

•Any kind of bending of the filters has to be avoided when washing them. Before fitting them again into the hood make sure that they are completely dry. (The colour of the filter sur- face may change throughout the time but this has no influence to the filter efficiency).

•When fitting the filters into the hood pay attention that they are mounted in correct position the handle facing outwards.

•Close the comfort panel.

EN	2
	22