Freecom Technologies 350 user manual When connecting to AP with WEP/WPA wireless security

EN

2

Freecom MediaPlayer

2."Manual Setting of IP address and Subnet mask" In case of AP Mode, disable DHCP support and do manual setting of IP address and subnet mask. At the time, each IP address is to be different and subnet mask is to be same.

AP: IP address(192.168.10.1. Subnet mask (255.255.255.0) ==> Freecom MediaPlayer: IP address(192.168.10.2. Subnet mask(255.255.255.0)

When connecting to AP with WEP/WPA wireless security

If a wireless station like AP or Adapter has WEP or WPA wireless security, you have to enter WEP/WPA key same as AP or wireless adapter.

It is possible to enter WEP/WPA key at "Wireless-I". Enable Security Mode and then enter WEP/WPA Key of AP or wireless adapter.

To enter use direction key "UP" or "DOWN", or "Number". After finishing that, finally press "SETUP" for saving configurations.

28