Freecom Technologies Media Player II user manual Installing Btsamba, Initial installation

EN

4

Freecom MediaPlayer II

Chapter 4: Installing BT_SAMBA

BT Player is a system software, it consists of the operating system (Linux+AP) and the application software (BT_SAMBA).

4.1 Initial installation

When inserting a hard disk to the system for the first time, the system will start with the hard disk format interface.

You can also press "SETUP" on the remote control to open the Setup menu and select "HDD Format" to format HDD.

Step 1: Press " " and " " on the remote control to make a selection.

When highlighting the YES button, press "ENTER" to enter the next step. Otherwise, select "Cancel" to return.

Step 2: Hard disk format

Press " " and " " on the remote control to select "Back" or "Format". When the "Format" button is highlighted, press "ENTER" to start. Otherwise, select "Back" button to go back.

Step 3: Install BT/Samba Extension

After HDD format is complete, the system will install BT/Samba automatically. Please select OK for the next step. The system will auto install according the following steps:

1.Install BT/Samba Extension

2.Install Bit-Torrent Support

3.Install Samba Server Support

4.Install Web Support

When the installation is complete, the system will display a success message at the end

38 of every step.