Freecom Technologies RCS-M2000U OPERATION contd, Accessory Installation, Exhaust Duct Kit

OPERATION (contd.)

6.Press “AUTO SWING” button on control panel to begin oscillating vertical louvers. The vertical louvers will move slowly from left to right and back again for optimum air distribution. Press button again to maintain a desired “fixed” position to distribute more cooling air to one side of the room. DO NOT adjust vertical louvers manually.

7.If desired, press “TIMER-SET” button on control panel to program the air conditioning unit to turn off in 1, 2, 3, 4, 5, 6, 7, 8, or 9 hours.

To cancel timer setting, press "TIMER-RESET" button.

ACCESSORY INSTALLATION

Exhaust Duct Kit

The Exhaust Duct Kit is an accessory which, when used with the RCS-M2000 series air conditioning units, will increase cooling efficiency by directing warm air exhaust out of the room. The Exhaust Duct Kit can be used with other Freecom accessories, such as the Window Panel Vent Kit (included), Sliding Door Vent Kit, Ceiling Vent Kit, or Through-the- Wall Kit for maximum cooling efficiency.

WARNING: The Freecom Exhaust Duct Kit has been specially designed for use with the RCS-M2000 series air conditioning units. Using other duct materials, compo- nents, or extensions will decrease cooling efficiency or cause damage to the product, and void your warranty.

1.Press “POWER ON/OFF” button to stop unit if it is operating. Unplug power cord from outlet.

2.Slide square end of bent exhaust duct kit over exhaust on rear of unit. Push nozzle onto round connector end of vent duct pipe.

3.Install outlet nozzle in an open window, through a wall or false ceiling.

10