10.Remove the microprocessor and heat sink assembly. See “Removing the microprocessor and heat sink assembly” on page 89.
11.Remove the microprocessor fan assembly. See “Removing the microprocessor fan assembly” on page 85.
12.Remove the memory modules. See “Removing the memory module” on page 84.
13.Remove the system board. See “Removing the system board” on page 92.
14.Remove all 11 screws that secure the main bracket to the front bezel.
15. Remove the four screws that secure the LCD panel to the main bracket.
Installing an LCD panel
To install an LCD panel, do the following:
1.Place the main bracket over the LCD panel, make sure the four screw holes in the main bracket align with those in the LCD panel.
2.Reinstall the four screws that secure the LCD panel to the main bracket.
