HEAT LOAD FORM
The heat load form on the following page may be used by servicing personnel to determine the heat loss of aconditioned space and the ambient winter design temperatures in which the unit will heat the calculated space.
The upper half of the form is for computing the heat loss of the space to be conditioned. It is necessary only to insert the proper measurements on the lines provided and multiply by the given factors, then add this result for the total heat loss in BTU/Hr./°F.
The BTU/Hr. per °F temperature difference is the 70°F inside winter designed temperature minus the lowest outdoor ambient winter temperature of the area where the unit is installed. This temperature difference is used as the multiplier when calculating the heat loss.
The graph shows the following:
Left Hand Scale | Unit capacity BTU/Hr. or heat loss |
| BTU/Hr. |
Bottom Scale | Outdoor ambient temperature, base |
| point. |
Heat Pump Model | BTU/Hr. capacity heat pump will |
| deliver at outdoor temperatures. |
Balance Point | Maximum BTU/Hr. heat pump |
| will deliver at indicated ambient |
| temperature. |
Following is an example using the heat load form:
A space to be conditioned is part of a house geographically located in an area where the lowest outdoor ambient winter temperature is 40°F. The calculated heat loss is 184 BTU/ Hr./°F.
Subtract 40°F (lowest outdoor ambient temperature for the geographical location) from 70°F (inside design temperature of the unit) for a difference of 30°F. Multiply 184 by 30 for a 5500 BTU/Hr. total heat loss for the calculated space.
On the graph, plot the base point (70°) and a point on the 40°F line where it intersects with the 5500 BTU/Hr. line on the left scale. Draw a straight line from the base point 70 through the point plotted at 40°F. This is the total heat loss line.
Knowing that we have a 5500 BTU/Hr. heat loss, and we expect that our heat pump will maintain a 70°F inside temperature at 40°F outdoor ambient, we plot the selected unit capacity BTU/Hr. of the unit between 35° and 60° on the graph and draw a straight line between these points. Where the total heat loss line and the unit capacity line intersect, read down to the outdoor ambient temperature scale and ¿nd that this unit will deliver the required BTU/Hr. capacity to approximately 30°F.
6
58
