4
920-198-01
A/C
Stop
Mode
Temp
Fan
Timer
O
F
/
O
C
A/C
Start Timer
On/Off
1- 4
Speed Smart
Fan
Check
Filter
Set
Hour
Power
Cool Money
Saver
®
PM
Fan
Only
Press to reset
13
DISPLAY
8
5
4
2
15
10
7
11
9
6
3
1
14
12
Figure 3
To start unit
1If your air conditioner is installed and plugged into a proper re-
hcuoT.ogotydaersiti,elc at pec Power button once. The unit will
automatically be in Cool mode with the temperature set at 75°F
(24°C)andthefanspeedatF1,thesleepsetting.Thereisa3-
minute delay before the compressor will turn on. (See "Automatic
Component Protection" on this page).
2Should the Check Filter light turn on when you ¿rst turn on the unit,
touch Check Filter to turn off the light. Check Filter light will come
).snoit curts nigni naelcretl¿rof7egapeeS(.esufosruoh052ret fano
Touch Check Filter to reset.
To set mode of operation
3When you ¿rst turn on the unit, it will be in the Cool mode (light on),
with constant fan.
4Touch MoneySaver®(light on) to activate the MoneySaver®feature.
This cycles the fan with the compressor so that the fan does not
.noit ac ¿i dim uh edsevorpmidnaygrenesevassihT.emitehtllanur
(MoneySaver®will also run the fan to sample the return air tempera-
ture if the off cycle is too long). Or you may prefer constant fan for
more air movement. To return to constant fan, touch Cool.
5Touch Fan Only (light on) if you want only the fan to run. You may want
to use this feature in conjunction with the FreshAir/Exhaustlever to
bring outside air into a room, or to exhaust stale air. (See page 7, "Fresh
Air and Exhaust Control" for more information.)
To adjust temperature [60°F(16°C)to90°F(32°C)]
6COOLER – Touch and hold until the display shows the desired
room temperature.
7WARMER – Touch and hold until the display shows the desired
room temperature.
8FAHRENHEIT / CELSIUS – Touch ºF/ºCto show the temperature
in Celsius, touch again to show Fahrenheit.
To adjust fan speed
9Touch 1-4 Speed to see current setting. Touch again to change
deepswolsi2F,)GNITTESPEELS(gnit testsewolehtsi1F.deeps
(LOW), F3 is medium speed (MED), F4 is high speed (HIGH).
To activate smart fan
10 Touch Smart Fan (light on). Smart Fan will adjust the fan speed
,elpmaxeroF.leveltrofmocderisedehtniatniamotyl lac i tam ot ua
do ir epdednetxenarofnepoeraemohruoynisroodedistuoehtfi
of time, or more people enter a room, Smart Fan may adjust to a
higher fan speed to compensate for the increased heat load. This
keeps you from having to adjust the fan speed on your own. Smart
Fan cannot be activated in the Fan Only mode.
To deactivate smart fan
11 Touch 1-4 Speed, and select your desired fan speed.
To set hour clock
12 Press Set Hour once to see the current clock setting. Continue
pressing the button until the hour closest to the actual time appears
in the display.
MAKE SURE YOU SET A.M. AND P.M. PROPERLY. A light will appear in
the upper left corner of the display when the hour is P.M.
NOTE: Minutes will NOT show on display.
To set the timer
NOTE: .snoitcnufremittesotgni tpmet taerofebkcolcruoHteS
YoucansettheA/C Start and A/C Stop ruohenofomum i nimaremit
apart and a maximum of 23 hours apart.
13 TIMER STOP -PresstheA/C Stop button and continue pressing
until the hour you want the unit to shut off appears in the display
(A.M. or P.M.). The stop time for cooling will then be set.
14 START TIME - Press A/C Start to view the current start time for
cooling. Continue pressing until the hour you want the unit to start
appears in the display (A.M. or P.M.). The start time for cooling will
then be set.
15 Press the Timer On/ Off button once to activate (light on) the timer
function. Touch Timer On/ Off again (light off) to cancel the timer
-esneebevahsemitffodnanoehtecnO.eris edosuoyfinoitcnuf
lected, they will remain in memory, and cycle daily until changed.
NOTE: eht,de tpur ret nisirewopr
odeggulpnusitinufI Set Hour button
ehtrotes erebtsum Timer On/ Off functions will not work.
Automatic component protection
.noitcetorPtnen op moCcitamotuAhtiwdeppiuqesitinuruoY
To protect the compressor of the unit, there is a three minute time delay if you
turn the unit off or if power is interrupted. The fan will not be affected.
How to operate your Friedrich room air conditioner (QuietMaster Programmable)