PROCEDURE A

1

If you are using the new sleeve (optionally

 

supplied with your unit),skip to step 3.

Otherwise, install the plastic grille from the kit. Cut the plastic grille to 25-1/2" wide and

15-1/4" high. Place the plastic grille to the inside of the wall sleeve at the rear flange.

FIG. 4

2 Fasten the 4 washer screws to secure the grille to the wall sleeve. If you need plastic nuts to mount plastic grille to the inside of the wall sleeve, there are plastic nuts in the installation kit. The nuts are installed from the inside of the sleeve and are pressing into the square holes of the rear flanges.Fasten the bracket to the upside of the wall sleeve using the washer screw. The bracket prevents the unit from leaving the sleeve.

Bracket

 

Bracket

Fasten the screws and the bracket

or

FIG. 5

3 Remove the backing from the Horizontal Insulation strip 13/8" x 5/8" x 27 3/16" and attach that to the inside bottom of the sleeve as shown below. Remove the backing from the Around Insulation strip 13/8" x 3/4" x 611/2" and attach that to the inside front of the sleeve as shown below.

Plastic rear grille

Steel rear grille

 

 

FIG. 7

 

 

 

 

5

Install the new unit into the wall sleeve.

6

To assemble trim, snap the tab of each piece

into the slot of the other piece as shown below.

Slide trim over the front of the air conditioner until trim is flush with sleeve as shown below.

Trim (2 ea)

Wall

FIG. 8

Parts and

Around Insulation

Horizontal Insulation

FIG. 6

4 Remove the metal rear grille and replace it with the plastic rear grille to improve unit energy efficiency. The plastic grille reduces the amount of hot air discharge that recirculates through the unit.

CAUTION

•Air conditioners covered in this manual pose an excessive weight hazard. Two or more people are needed to move and install the unit.

To prevent injury or strain, use proper lifting and carrying techniques when moving unit.

•When handling the air conditioner, be careful to avoid cuts from sharp metal fins on front and rear coils.

•Make sure air conditioner does not fall during removal.

•If unit does not operate after installation check, to be sure the circuit interrupter has not been tripped. Refer to the Troubleshooting guide for reset procedure.

Installation

13

Page 12 Page 14
Page 13
Image 13
Friedrich UE10, UE12, UE08 manual Procedure a, Make sure air conditioner does not fall during removal
Page 12 Page 14

UE08, UE10, UE12 specifications

Friedrich is a renowned name in the air conditioning industry, known for its commitment to quality and innovation. Among their popular models are the UE12, UE08, and UE10 air conditioning units, each designed to cater to different needs while maintaining high energy efficiency and performance standards.

The Friedrich UE12 is a robust unit that offers powerful cooling capabilities, making it suitable for medium to large rooms. With a cooling power of approximately 12,000 BTU, it effectively cools spaces without requiring excessive energy consumption. This model features a programmable thermostat, enabling users to set desired temperatures and automatically adjusting to maintain them. The UE12 also includes a remote control, allowing for easy adjustments from across the room. Its built-in dehumidifier function is an added bonus, keeping indoor humidity levels in check, which improves overall comfort and air quality.

The Friedrich UE08, with its 8,000 BTU cooling capacity, is perfect for smaller rooms or individual spaces. It strikes a balance between power and energy efficiency, making it ideal for those looking to cool a bedroom, home office, or den without incurring high electricity bills. The model features an easy-to-use control panel and a remote control, giving users flexibility in operating the unit from anywhere in the room. Additionally, its sleek design blends well with various interior styles, making it both a practical and aesthetically pleasing option.

Lastly, the Friedrich UE10 provides a cooling capacity of 10,000 BTU and is a versatile option suitable for medium-sized rooms. This model also includes advanced features like a multi-speed fan, allowing users to customize airflow according to their preferences. The UE10 is equipped with a programmable timer, allowing users to set it to turn on or off at specific times, thus maximizing energy efficiency. The unit's whisper-quiet operation and energy-saving capabilities position it as an excellent choice for those who value tranquility in their indoor environment.

Overall, the Friedrich UE series air conditioning units demonstrate a commitment to quality, efficiency, and user-friendly features. From the powerful cooling of the UE12 to the compact design of the UE08, these units cater to diverse cooling needs while ensuring optimal performance.
Top Page Image Contents