Friedrich UE12 Before you call for service, Trouble Shooting Tips, Normal Operation, Problem

Models: UE08 UE10 UE12

1 60
Download 60 pages 21.08 Kb
Page 18
Image 18
Before you call for service...

Before you call for service...

Trouble Shooting Tips

Troubleshooting Tips Save Time and Money!

Review the chart below first and you may not need to call for service.

Normal Operation

You may hear a pinging noise caused by water being picked up and thrown against the condenser on rainy days or when the humidity is high. This design feature helps remove moisture and improve efficiency.

You may hear the thermostat click when the compressor cycles on and off.

Water will collect in the base pan during high humidity or on rainy days. The water may overflow and drip from the outdoor side of the unit.

The fan may run even when the compressor does not.

Abnormal Operation

Problem

Possible Causes

What To Do

 

 

 

 

 

 

The air conditioner is

• Make sure the air conditioner plug is pushed

 

 

unplugged.

completely into the outlet.

 

Air conditioner

The fuse is blown/circuit

• Check the house fuse/circuit breaker box and

 

breaker is tripped.

replace the fuse or reset the breaker.

 

does not start

 

 

Power failure.

• If power failure occurs, turn the mode control to OFF.

 

 

 

When power is restored, wait 3 minutes to restart the

 

 

 

air conditioner to prevent tripping of the compressor

 

 

 

overload.

 

The current interrupter • Press the RESET button located on the power cord

device is tripped.plug, If the RESET button will not stay engaged,

discontinue use of the air conditioner and contact a qualified service technician.

Airflow is restricted. • Make sure there are no curtains, blinds, or furniture blocking the front of the air conditioner.

for service...

Air conditioner does not cool as it should

The THERMOSTAT may • Turn the knob to the coolest temperature setting to the

not be set high enough. right. The cooler setting provides maximum cooling.

The air filter is dirty. • Clean the filter at least every 2 weeks.

See the operating instructions section.

The room may have been • When the air conditioner is first turned on,

hot.

you need to allow time for the room to cool down.

Cold air is escaping. • Check for open furnace floor registers and cold air returns.

Set the air conditioner's vent to the closed position.

Before you call

Cooling coils have iced up. • See Air Conditioner Freezing Up below.

Air conditioner

Ice blocks the air flow and

• Set the mode control at Med Fan or High Cool with

freezing up

stops the air conditioner
the thermostat towards the left.

 

from cooling the room.

 

 

 

 

 

 

18

Page 18
Image 18
Friedrich UE12, UE10 Before you call for service, Trouble Shooting Tips, Normal Operation, Abnormal Operation, Problem