Frigidaire 316902315 important safety instructions Setting Oven Controls, Setting the clock

SETTING OVEN CONTROLS

Setting the clock

When the appliance is first powered up or when the power supply to the appliance has been interrupted and restored, the display will flash the time of day. Be sure to set the clock with the correct time of day before using the oven.

To set the clock when the display is flashing:

1.Press once. "CLO" will appear in the display.

2.Within 5 seconds, adjust the time by pressing the or and release the keypad when the correct time

displays. The new setting will accept in 5 seconds.

To adjust the clock when the display is not flashing:

1.Press keypad twice (do not hold keypad down). "CLO" will appear in the display.

2.Within 5 seconds, adjust the time by pressing the or and release the keypad when the correct time displays. Any adjustments made will accept in 5 seconds.

NOTE

The clock cannot be set or adjusted when the oven is active including self-clean.

Changing between continuous bake setting or 12-Hour Energy Saving feature

The oven control has a built-in 12-Hour Energy Saving feature that will shut off the oven if the control is left on for more than 11 hours and 59 minutes. The oven may be programmed to override this feature for continuous baking.

Changing to continuous bake setting:

1. Press and hold keypad for 5 seconds until a

tone sounds. " — — hr" will appear in display for continuous cooking. The current time of day will return to the display.

2.To cancel the continuous bake setting, press and hold

keypard for 5 seconds until a tone sounds.

"12hr" will appear in display indicating that the control has returned to the 12-Hour Energy Saving feature.

NOTE

Changing between continuous bake or 12-Hour Energy savings mode does not change how the cooktop operates.

Changing temperature display mode (°F or °C)

The oven control is factory preset to display the oven temperature with Fahrenheit (°F) values. The control may be changed to display either Fahrenheit or Celsius

temperatures.

To change the temperature to display Celsius (°C) or Fahrenheit(°F):

1.Press keypad. "— —" appears in the display.

2.Press and hold the keypad until "HI" appears in the display.

3.Press and hold keypad until °F or °C appears in the display.

4.Press the or keypad to change °F to °C or °C to °F.

5.Press any keypad to return to normal operating mode.

NOTE

The temperature display mode cannot be changed when the oven or self-clean is active.

Setting for audible or silent keypad operation

Normally a beep will sound each time a keypad is pressed. If desired, the oven control may be set for silent keypad operation.

To set for silent operation:

Press and hold the keypad until the control beeps

once (about 7 seconds). This will block the controls from sounding when a keypad is pressed in the future.

To set for audible operation:

Press and hold the keypad until the control beeps once (about 7 seconds).

NOTE

When the control is set for silent keypad operation the timer, preheat and any end of cycle or any error tone alerts will remain audible.

16