30" DUAL FUEL
(Models with an Electric Oven and a Gas Cooktop)
NOTE:
1.Do not pinch the power supply cord or the |
flexible gas conduit between the range and |
the wall. |
2.Do not seal the range to the side cabinets. |
3.24" (61 cm) minimum clearance between |
the cooktop and the bottom of the cabinet |
when the bottom of wood or metal cabinet is |
protected by not less than ¼" (0.64 cm) flame |
retardant millboard covered with not less than |
No. 28 MSG sheet metal, 0.015"(0.4 mm) |
stainless steel, 0.024"(0.6 mm) aluminum, or |
0.020" (0.5 mm) copper. |
30" (76.2 cm) minimum clearance when the |
cabinet is unprotected. |
4.For cutouts below 22 7/8"(58.1 cm), appliance |
Door Open
21¾” (55.25 cm)
D
C
A
will slightly show out of the cabinet. |
5.Allow at least 19 ¼" (48.9 cm) clearance for |
door depth when it is open. |
B
Side Panel
***IMPORTANT: To avoid cooktop breakage for cutout width (E dimension) of more than 30 1/16" (76,4 cm), make sure the appliance is centered in the counter opening while pushing into it. Raise leveling legs at a higher position than the cabinet height (see page 3), insert the appliance in the counter and then level. Make sure the unit is supported
by the leveling legs and NOT by the cooktop itself.
IMPORTANT: Cabinet and countertop width should match the cutout width.
E
E
22 7/8"(58.1 cm) min.
23 1/4"(59.05 cm) max.
(see Note 4)
1 1/8" (2.86 cm)
FRONT OF
CABINET FRef.
A. HEIGHT | B. WIDTH | C. COOKTOP | D. TOTAL DEPTH TO | E. CUTOUT WIDTH*** | F. CUTOUT | G. HEIGHT |
(Under Cooktop) |
| WIDTH | FRONT OF RANGE | (Countertop | DEPTH | OF COUNTERTOP |
|
|
|
| and cabinet) |
|
|
35 7/8" (91,1 cm) | 30" (76,2 cm) | 31 1/2" | 28 5/16" (71,9 cm) | 30±1/16" | 21 3/4" (55,2 cm) Min. | 35 7/8" (91,1 cm) Min. |
|
| (80 cm) |
| (76,2±0,15 cm) | 22 1/8" (56,2 cm) Max |
|
36 5/8" (93 cm) |
|
|
|
| 24" (61 cm) Min. with | 36 5/8" (93 cm) Max. |
|
|
|
|
| backguard |
|
|
|
|
|
|
|
|
2