3
CO2 CANISTER SAFE HANDLING
• CO2 canisters must be handled with extreme care. They
contain potentially hazardous high pressure compressed
gas.
• ALWAYS connect CO2 gas canisters to a pressure
regulator.
• NEVER drop or throw the CO2 canister.
• NEVER connect gas canister directly to keg.
• ALWAYS keep CO2 canisters in a cool place (70º or
less) and away from heat.
• In case of CO2 leakage, ventil ate and evacuate the area
immediately.
• ALWAYS keep canister secured in an upright position.
• Check the Department of Transportation (D.O.T.) test
date on the canister neck and do not use if older than 5
years.
• Return outdated canister to your gas supplier for one that
is within the time window.
• If voltage varies by 10% or more, performance of your
beverage cooler may be affected. Operating beverage
cooler with insufficient power can damage the
compressor.
• To prevent the beverage cooler from being turned off
accidentally, do not plug unit into an outlet controlled by
a wall switch or pull cord. It is recommended that a
separate circuit serving only your beverage cooler be
provided.
• Do not pinch, knot, or bend the cord in any manner.
• DO NOT use this appliance outside. It is designed for
indoor use only.
• NEVER unplug the beverage cooler by pulling on the
cord. Always grip the plug firmly, and pull straight out
from the receptacle.
• To avoid electrical shock, unplug the beverage cooler
before cleaning.
N
thOTE: Turning the temperature control to “OFF” turns off
e compressor, but does not disconnect the power to other
lectrical components. e
DRIP TRAY AND MOUNTING HARDWARE BOX
(1) Drip Tray 1 piece
(
(2) Drip Tray Cover 1 piece
3) Drip Tray Bracket 1 piece
(4) CO2 Canister Bracket 1 piece
(5) Mounting Screw s 6 pieces
(
(6) 4” Long Carriage Bolt 1 piece
7) Wing Nut 1 piece
(8) Hose Routing Clips 2 pieces
(1) DRIP TRAY (2) DRIP TRAY
COVER (3) DRIP TRAY
BRACKET (4) CO2CANISTER
BRACKET
(6) 4” LONG
CARRIAGEBOLT
(5) MOUNTING
SCRE
W
(7) WING NUT (8) HOSE
ROUTINGCLIP
This Use and Care Manual provides specific assembly,
perating and maintenance instructions for your model. Use
he beverage cooler only as instructed in this Use and Care
anual. Before starting the beverage cooler, follow these
mportant first steps.
o
t
M
i
PARTS AND ACCESSORIES
Your beverage cooler comes with a box that contains all the
arts and accessories needed for your beverage cooler.
heck to make sure that you have received the box
ontaining all of the components listed below. You will need
he following tools to assemble the beverage cooler.
p
C
c
t
PHILLIPS™
SCREWDRIVER
SOCKET
WRENCH
A
DJUSTABLE
WRENCH
PLIERS