Aiwa NSX-V9000 manual L.=-==+Czj, Inserting Tapes, Playing Back A Tape, Music Sensor, 1I ENGLISH

BASIC OPERATIONS

■

+b

DIRECTION/ PRESET

- DOWN B r-fp

&

INSERTING TAPES

●On deck 1, tapes are always played back on both sides.

On deck 2, you can select a reverse mode to play back one or both sides.

●Use Type I (normal), Type II (high/CrOz) or Type IV(metal) tapes for playback.

Press theTAPE button and press the= EJECT mark to open the cassette holder.

A

Insert a tape with the exposed side down. Push the cassette holder to close.

To select a reverse mode (deck 2 only)

Each time the REV MODE button is pressed, the reverse mode changes.

L.=-==)+CZ)J.

To play one side only, turn on 2.

To play from front side to back side once only, turn on Z). To play both sides repeatedly, turn on C=).

●When tapes are loaded in both decks, Z) in the display indicates Continuous Play.

PLAYING BACK A TAPE

Insert a tape.

1 Press the DOLBY NR button and turn Dolby NR on or off to match the playback tape.

UINR

For tapes recorded with DOLBY NR, turn on M NR. For tapes recorded without DOLBY NR, turn off M NR.

2 Press the <› button to start play.

The tape counter indicates the tape running length.

Playback side of the tape

D:The front side is being played (forward).

4 The back side is being played (reverse).

When tapes are loaded in both decks

Press the TAPE button first to select a deck.

The selected deck number is displayed.

To stop play, press the ■ button.

To pause play (deck 2 only), press the II button. To resume play, press again.

To change the playback side, press the <> DIRECTION/ PRESET button in play or pause mode.

To fast forward or rewind, press the << or ➤> button in stop mode. Then press the ■ button to stop the tape.

To start play when the power is off (Direct Play Function)

Press the TAPE button. The power is turned on and play of the inserted tape begins,

To set the tape counter to 0000

Press the H CLEAR button in stop mode.

The counter is also set to 0000 when the cassette holder is opened.

MUSIC SENSOR

If there is a 4-second or longer blank between each track, a search for the beginning of the current or next track during playback can be done easily.

When the ➤ indicator of the <E button is flashing, press the FE button to move to the next track or the <+ button to move to the beginning of the current track.

When the < indicator of the + ➤ button is flashing, press the +4 button to move to the next track, or the bk button to move to the beginning of the current track.

The search function uses a music sensor that may not be able to detect tracks for tapes with:

●Blanks of less than 4 seconds between tracks

●Noisy blanks

●Long passages of low-end sound

●Low overall recording levels

1I ENGLISH