Aiwa NSX-V9000 Dubbing The ‘Whole Tape, Dubbing A Tape Manually, HVGL/SH14, Press the TAPE button

DUBBING A TAPE MANUALLY

Preparation’

● Set the tape to the point where recording will start. ● The reverse mode is automatically set to 1.

Note that recording will be done on one side of the tape only.

1 Press the TAPE button.

2 Insert the original tape into deck 1 and the tape to be recorded on into deck 2.

Imerl the tapes with the sides to be played back or recorded on first facing out from the unit.

3Press the DOLBY NR button to turn off the Dolby NR.

IXl NR on the display goes out.

4Press the TAPE/DECK 1/2 button to select deck 1.

TAPE 1 is displayed.

5Press the ● REC/REC MUTE button to start recording.

Playing and recording start simultaneously.

To stop dubbing

Press the ❑ button.

To set the Dolby NR when playing back the dubbed tape

Press the DOLBY NR button and turn Dolby NR on or off to match the original tape.

DUBBING THE ‘WHOLE TAPE

This function allows you to make exact copies of both sides of the original tape. The reverse side of both tapes will start simultaneously as soon as the longer tape has been reversed.

~ Dubbing does not start from a point halfway in the tape. ● The reverse mode is automatically set to Z).

● The Dolby NR does not affect recording.

1 Press the TAPE button.

2 Insert the original tape into deck 1 and the tape to be recorded on into deck 2.

Insert each tape with the sidle to be played back or recorded		❑
on first facing out from the unit.
3 Press the SYNC DUEI button once or twice to start
recording.
@ For recording at normal speed, press it once to display
N-DUB.
@ For recording at high speed, press it twice to display H-
DUB,
a	@

The tapes are rewound to the beginning of the front sides, and recording starts.

To stop dubbing

Press the ❑ button.

To set the Dolby NR when playing back the dubbed talpe

Press the DC)LBY NR button and turn Dolby NR on or off to match the original tape.

c Recording does not start, if the erasure prevention tab on either side of the tape is broken off.

●If the leader segment of the tape to be recorded on is longer than that of the original ti~pe, recording on the reverse side may stop midway through the recording. In this case, dub each side manually following the procedure in “DUBBINGA TAPE MANUALLY”.

HVGL/SH14