Setting Silent Control Operation
The STOP TIME _ and CLEAN q_) pads control the Silent Control operation feature. The Silent Control operation
feature allows the oven control to be operated without sounds or beeps whenever necessary. programmed for silent operation and later returned to operating with all the normal sounds and
If desired the control can be beeps.
INSTRUCTIONSPRESSDISPLAY
To change control from normal sound operation to |
|
| ||||||||
silent | control | operation: |
|
|
|
|
| |||
1. | To tell if your | range | is set for | normal or silent | operation press | Figure | 1 | |||
| and | hold _ | for 7 seconds. | "DELAY" wilt appear and flash in | _for7seconds |
| ||||
| the display (Fig. 1). If ":SP" appears (Fig. 2), the control will |
|
| |||||||
| operate with normal sounds and beeps. If":- |
|
| |||||||
| the | control | is in the | silent | operation mode. |
| Figure | 2 | ||
2. | Press ,OI | to switch | between | normal sound | operation and silent | @ |
| |||
| operation mode. The display will show either ":SP" (Fig. 2) or ":- |
|
| |||||||
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
| Figure | 3 |
3. | Press | Ito | acceptthe | change orpress_to | rejectthe |
|
| |||
| change. |
|
|
|
|
|
|
|
|
17