Frigidaire FGGS3065PF important safety instructions Before Setting Surface Controls

Models: FGGS3065PF

1 35
Download 35 pages 28.12 Kb
Page 8
Image 8

BEFORE SETTING SURFACE CONTROLS

Control locations of the gas surface burners

Your built-in range is equipped with gas surface burners with different BTU ratings. The ability to heat food quicker and in larger volumes increases as the burner size increases.

The small simmer burner is best used for simmering delicate sauces, etc. This burner is located at the right rear burner position on the cooktop (see Figure 1). The standard burner can be used for most surface cooking needs. The standard burners are located at the left front and left rear positions on the cooktop.

The power burners are best used for bringing large quanti- ties of liquid rapidly up to temperature or when preparing larger quantities of food. The POWER burner is located at the right front position on the cooktop.

Regardless of size, always select cookware that is suitable for the amount and type of food being prepared. Select a burner and flame size appropriate to the pan. Never allow flames to extend beyond the outer edge of the pan.

Assembly of the surface burner caps and burner grates

It is very important to make sure that all of the Surface Burner Caps and Surface Burner Grates are installed correctly and at the correct locations.

1.Remove all packing material from cooktop area.

2.Discard all packing material (if applicable).

3.Unpack Burner Grates and position on the cooktop.

IMPORTANT

Do not allow spills, food, cleaning agents or any other material to enter the gas orifice holder opening.

Always keep the burner caps and burner heads in place whenever the surface burners are in use.

Figure 1: Burner locations

8

Page 8
Image 8
Frigidaire FGGS3065PF Before Setting Surface Controls, Control locations of the gas surface burners