INSTALLATION
2.You can raise or lower each door. Use a 3/8” socket wrench to turn the adjustment screws (1 per side).
To raise: turn adjustment screw clockwise.
To lower: turn adjustment screw counterclockwise.
3.Ensure both doors are
4.After unit is leveled, lower
Door | Door |
1.Open door to provide access to screw.
2.Loosen screw.
3.Adjust door to desired location.
Rotate
Door to Desired
Location
Adjusting Door
4.Rotate door stop until it makes contact with the lower hinge.
5.Retighten screw.
Raise
Leg
Lower
5.Install the toe grille by fitting into place.
To adjust the door stop:
Door stop is adjustable between 85 to
145degrees.
NOTE
View shown is looking up at the bottom of the refrigerator door.
Lower | Door | |
Hinge | ||
Stop | ||
|
Min
Open
Rotate
Door
Stop
Screw
Retighten Screw
6.Ensure door stops in desired location before resuming normal use.
Max Open
Screw
Adjustable Door Stop
7