CARE & CLEANING
Installing the Ice Chute Extension
1. Turn the refrigerator off using the button on the control panel (refer to the “Controls” section of this Manual).
2.Align the extension with the ice chute so that the snap clips are just inside the front edge of the chute.
3. Push upward until the extension snaps into place.
4. Turn your refrigerator back on.
Replacing LED Lights (select models)
The fresh food compartments of your refrigerator may have LED lights. Always use Frigidaire parts for replacement.
To replace LED Lights:
Push Upward Until The Extension Snaps In Place
1.Unplug your refrigerator’s power cord.
2.Remove light cover by pushing up and out.
3.Hold the LED cover with one hand and pull the connector with the other hand while pressing the connector latch.
4.Replace LED light and snap in place assuring the light is facing in toward the unit (inside fresh food).
LED Light Harness Removal
LED Light Removal
NOTE
LED lights are in series so if one is bad or unplugged, several lights may not light up.
Replacing Light Bulbs (select models)
Both the freezer and fresh food compartments of your refrigerator include incandescent light bulbs that will need replacing from
CAUTION
Wear gloves when replacing incandescent light bulbs to avoid getting cut.
35