IMPORTANT SAFETY INSTRUCTIONS
•When using the convection or combination cooking functions, both the outside and inside of the oven will become hot. Always use hot pads to remove containers of food and cooking accessories such as the oven shelf, round wire rack and glass tray.
•Do not clean with metal scouring pads. Pieces can burn off the pad and touch electrical parts involving risk of electric shock.
•Thermometer— Do not use regular cooking or oven thermometers when cooking by microwave or combination. The metal and mercury in these thermometers could causearcing and possible damage to the oven. Do not use a thermometer in food you are microwaving unless the thermometer is designed or recommended for use in the microwave oven.
WARNING
If you see arcing,press the Stop/Clear button and correct the problem.
ARCING
Arcing is the microwave term for sparks in the oven. Arcing is caused by:
•The metal shelf not installed correctly so it touches the microwave wall.
•Metal or foil touching the side of the oven.
•Foil not molded to food (upturned edges act like antennas).
•Metal, such as
•Recycled paper towels containing small metal pieces being used in the microwave.
Federal Communications Commission Radio Frequency Interference Statement (U.S.A. Only)
This equipment generates and uses ISM frequency energy and if not installed and used properly, that is in strict accordance with the manufacturer's instructions, may cause interference to radio and television reception. It has been type tested and found to comply with limits for ISM Equipment pursuant to part 18 of FCC Rules, which are designed to provide reasonable protection against such interference in a residential installation.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encoura ged to try to correct the interference by one or more of the following:
•Reorient the receiving antenna of the radio or television.
•Relocate the microwave oven with respect to the receiver.
•Move the microwave oven away from the receiver.
•Plug the microwave oven into a different outlet so that the micr owave oven and the receiver are on different branch circuits.
The manufacturer is not responsible for any radio or television interference caused by unauthorized modification to this microwave oven. It is the responsibility of the user to correct such interference.
4
