Frymaster 2836 Series Probable Causes, Corrective Action, Basket Lift Problems

Problem	Probable Causes	Corrective Action
		This in an indication of a malfunction
Display shows .	Frypot temperature is more than 410°F	in the temperature control circuitry,
	(210°C) or, in CE countries, 395°F	including a failure of the high-limit
	(202°C).	thermostat. Shut the fryer down
		immediately and call FASC.
		This display is normal when the fryer
		is first turned on and may appear for a
		short while if a large batch of frozen
		product is added to the frypot. If the
		display never goes out, the fryer is not
		heating. Look for a decimal in the
Display shows .	Frypot temperature is more than 21°F	LED display between digits 1 and 2.
		If the decimal is present, the computer
	(12°C) below setpoint.
		is calling for heat and is functioning
		properly. See Fryer Does Not Heat in
		Control and Heating Problems
		(Section 5.2.1). If the decimal is not
		present, the computer is not calling for
		heat and may be malfunctioning.
		Turn the fryer off and call FASC.
		This indicates a problem within the
Display shows .	Problem with the temperature measuring	temperature measuring circuitry that is
		beyond the scope of operator
	circuitry including the probe.	troubleshooting. Shut the fryer down
		and call FASC.
		The CM III.5 computer may be
		programmed for constant temperature
Frypot temperature is	Computer is programmed for constant	display or countdown timer display.
		To change setting press the Program
displayed constantly.	temperature display.
		Mode Switch . Code will appear
		in left display. Press 1, 6, 5 and L to
		toggle between these display options.
5.2.3 Basket Lift Problems

Problem	Probable Causes	Corrective Action
Basket lift movement		Apply a light coating of Lubriplate or
is noisy, jerky, or	Lack of lubrication on basket lift rods.	similar lightweight white grease to the
erratic.		rod and bushings.

5-4