Frymaster 2836 manual Terminal Block Mount Assembly

2.5Contactor and Power Cord Box Assembly (cont.)

*	802-2246	Label, Caution
*	802-0742	Label, (Inside Cabinet) Ground
*	802-2239	Label, Terminal Block (N & L1)
*	802-1991	Label, Terminal Block (L1, L2, L3)
*	802-1989	Label, Reduce Elec. Risk Warning
*	WIR0607	Wire Assembly, FP28/36S Contactor Box Fuse (Used on 208/240V)
*	WIR0598	Wire Assembly, FP28/36S Contactor Box (Used on 480V)
*	WIR0690	Wire Assembly FP28DV Contactor Box (Used on 480V)
*	WIR0688	Wire Assembly FP28DV Contactor Box (used on 480V)

*Not Illustrated

2.6Terminal Block Mount Assembly

Item	Part Number	Description
	106-4471	Terminal Block Mount Assembly (Use 106-6176 for RH mount Assembly)
1	200-8525	Spacer, Terminal Block Mounting
2	200-9409	Cover, Terminal Block
3	200-9410	Spacer, .250 OD x .035 Wall x .50 Long
4	807-1043	Bushing, 1.06 ID
5	807-4080	Block, 600v 175A CU / 135A AL 3 Pole Power Terminal
6	807-4081	Cover, Plastic Power Terminal Block
7	809-0185	Washer, #10 Flat SAE
8	809-0250	Nut, 6-32 KEPS HX ZP
9	826-1374	Screw, #10-1/2” Hex Head (Qty. of 25)
10	810-2866	Connector, 1” Screw in Flex (Use 807-4325 for 90º connector)
11	810-2965	Plug, 1-1/4” : Snap In
12	823-4976	Mount W/A, Terminal Block

2-16