CHAPTER 1: Introduction
1.1Parts Ordering and Service Information
In order to assist you as quickly as possible, the Frymaster Authorized Service Agency (ASA) or Service Department representative requires certain information about your equipment. Most of this information is printed on a data plate affixed to the inside of the door.
Parts orders may be placed directly with your local ASA or distributor. Included with the unit when shipped from the factory is a list of ASAs. If you do not have access to this list, contact the Frymaster Technical Service Department at
When ordering parts, the following information is required:
Model Number:
Serial Number:
Voltage:
Item Part Number:
Quantity Needed:
Service information may be obtained by contacting your local ASA/Distributor. Information may also be obtained by calling the Frymaster Technical Service Department at
Model Number:
Serial Number: Voltage:
In addition to the model number, serial number, and voltage, please be prepared to describe the na- ture of the problem and have ready any other information that you think may be helpful in solving your problem.
RETAIN AND STORE THIS MANUAL IN A SAFE PLACE FOR FUTURE USE.
1.2Safety Information
Before attempting to operate your unit, read the instructions in this manual thoroughly.
Throughout this manual, you will find safety notations enclosed in
CAUTION
CAUTION boxes contain information about actions or conditions that may cause or result in a malfunction of your system.
WARNING
WARNING boxes contain information about actions or conditions that may cause or result in damage to your system, and which may cause your system to malfunction.
DANGER
