HCP
4.7 Programming Overview
A Palm Pilot loaded with the HCP software is available. All programming of the cabinet, except initial default settings, is first entered into a Palm Pilot then beamed into the HCP. Below is an annotated look at the main HCP screens on a Palm Pilot. Programming and use are covered in Chapters 5 and 6. See the Palm Pilot manual for a description of its operation.
Food Library
Menu
Menu bar Tap Setup to reveal the menu bar, which is annotated on the adjoining page.
Edit
This function, which requires a password to open, allows the holding parameters of a food item to be changed. See Chapter 5 for passwords.
Contains holding parameters for existing items and special items created by the user. Items are stored here and copied to a menu when needed. The items are permanently stored in the Library unless erased by the user.
Accesses cabinet configurations for breakfast, lunch and specials.
Menu
Tapping this menu button reveals a display to rename, delete or create menus. Five is the maximum. A password is required. See Chapter 5.
Menus 1 - 5
Food items are stored in a specific menu: Menu 1 – Menu 5. The menu for a food item is selected here.
Add
Used to create new food items. A password is required. See Chapter 5.
Language
Used to change the language displayed and change temperature display from Fahrenheit to Celsius. A password is required. See Chapter 5.
abc | 123 | |
| ||
Used to access a | Used to access a | |
keyboard, which | ||
number keyboard, | ||
allows text entry and | ||
which allows | ||
editing of menu | ||
numerical entry. | ||
items. | ||
Figure 2 | ||
|
Menu column Displays items available in the selected menu.
Copy
Tap this button to move items from the Food Library to a selected menu.
Remove
Used to remove items from a menu.
Logs
Shows cabinet activity.