Frymaster HCP operation manual

HCP

Step 6:The Palm’s Add-on folder should open. If not, navigate to it by clicking the folder icon. See Arrow. When the Palm folder is visible in the dialog box, double-click it and its contents will be displayed.

Step 8: The Install Tool is displayed with the highlighted HCP files. Close this box. See arrow.

Figure 7: Double-click the Add-on folder and its contents are displayed. Hold down the control key and single-click all files in the folder with a HCP prefix. Click Open.

Step 9: A new Install Tool dialog box will be displayed, saying the files will be installed when a HotSync is performed. Click OK.

Step 10: Press the HotSync button on the Palm’s cradle. The HotSync Progress dialog box is displayed. A HotSync successful transfer message will be displayed on the Palm’s screen.

Step 11: Turn on the Palm. You will find the HCP icon in the Utilities menu. Click it.

Step 12: It is necessary to enter a password and change the language display from Default to English at the completion of the software installation. See Chapter 5 for password entry language choice instructions.

Setting the software for 2 or 4-slot operation is covered in Chapter 5.

10-3