HCP
Step 4: Choose a product for each slot. All the products in a slot must have compatible setpoints.
Repeat these steps to configure the cabinet for each menu.
NOTE: All five of the menu configurations are transferred to the cabinet each time menu changes are beamed into the HCP cabinet.
Step 5: The cabinet should now be configured for all five menus.
Step 6: Ensure the receiving lens on the front of the HCP cabinet is clean. Hold the Palm Pilot parallel with the floor and aim it at the lens from no more than one foot away.
Tap the Transfer button.
Tap the TxirDa button.
The cabinet will beep and the Palm Pilot will display a message, indicating a successful transfer. All five menus established on the Palm are now accessible with the menu key on the HCP cabinet.
