Choosing a Display
The camera is equipped with an electronic viewfinder (EVF) and an LCD monitor (LCD). Follow the steps below to choose a display.
1Display the setup menu.
1.1Press MENU/OK to display the menu for the current mode.
1.2Press the selector left to highlight the tab for the current menu.
1.3Press the selector down to high- light the setup menu tab con- taining uEVF/LCD SETTING.
1.4Press the selector right to place the cursor in the setup menu.
2Select uEVF/LCD SETTING. Highlight uEVF/LCD SETTING and press MENU/OK.3Choose a display.
Highlight one of the following op- tions and press MENU/OK.
Option | Description | ||
| EEYE | Automatic | EVF | |
display selection |
| ||
SENSOR | LCD | ||
using eye sensor | |||
|
| ||
| LCD | LCD monitor |
| |
only | LCD | ||
| |||
|
| EVF | |
| EVF | Viewfinder only |
| |
EVF ONLY | Viewfinder only; | EVF | |
| + E | eye sensor turns |
| |
| display on or off |
| |
| The Eye Sensor |
|
The eye sensor turns the viewfinder on when you put your eye to the viewfinder and turns | Eye sensor |
it off when you take your eye away (note that the eye sensor may respond to objects other |
|
than your eye or to light shining directly on the sensor). If automatic display selection is |
|
enabled, the LCD monitor will turn on when the viewfinder turns off. |
|
20