tWhen “IEEE1394” is selected:
OFF (Factory default)
Digital audio signals are not output from the IEEE1394 terminal.
ON
Digital audio signals are output from the IEEE1394 terminal.
No audio signals are output from the analog connectors when IEEE1394 is set.
BWhen “ON” is selected:
This will lead to the “AUTO PLAY”, and “AUDIO FORMAT” setting screens. Select the item to be set using the (•, ª) cursor buttons and press the ENTER button.
AUTO PLAY
Set this when automatically playing this unit from another device, under circumstances in which this unit is used in conjunction with a DENON device that supports IEEE1394.
AUDIO FORMAT
Set this format of audio signals from IEEE1394 connector.
BWhen “AUTO PLAY” is selected:
3 | OFF (Factory default) |
Set this when you do not wish to control the operation of this unit | |
| from another device. |
| ON |
| Set this when you wish to control the operation of this unit from |
| another device. |
BWhen “AUDIO FORMAT” is selected:
FORMAT1 (Factory default)
Set this when you conjunction with a DENON device.
FORMAT2
This is a mode for future system expansion.
[IEEE1394 indicator in the display]
• When “IEEE1394” set to “ON”, this indicator lights as bellow.
flashing ....................... | self check of IEEE1394 connections. |
light............................. | IEEE1394 connection is OK. |
slow flashing .............. | IEEE1394 connection is NG. (Loop |
| connection) confirm the connection. |
fast flashing ................ | IEEE1394 connection is NG. confirm the |
| connection. |
Remote control unit | Remote control unit | ||
D I G I TA L I NTERF ACE | SETUP | ||
HDMI/ DV I PIC TURE | ADJUST | ||
HDM I | AUDIO | SETUP | |
HDM I | AUTO | FORMAT |
|
DENON LINK |
|
| |
I E E E 1 3 9 4 |
| OFF | |
|
|
| ON |
E X I T | SE TUP |
|
|
SE L ECT : |
| DEC I S I ON : ENTER BUT TON | |
I EEE 1 3 9 4 SETUP |
| ||
| I EEE 1 3 9 4 SETUP | ||
AUTO | PL AY |
| OFF |
AUD I O F ORMAT | F ORMAT 1 | ||
SE L ECT : 
DEC I S I ON : ENTER BUT TON
I EEE 1 3 9 4 SETUP
| I EEE 1 3 9 4 | SETUP |
| |
|
|
|
| |
AUTO PL AY |
|
| OFF | |
AUD I O F ORMAT |
|
| ON | |
SE L ECT : 
DEC I S I ON : ENTER BUT TON
I EEE 1 3 9 4 SETUP
| I EEE 1 3 9 4 | SETUP |
| |
AUTO PL AY |
|
|
| |
AUD I O F ORMAT |
| FORMAT1 | ||
|
|
| FORMAT2 | |
SE L ECT : 
DEC I S I ON : ENTER BUT TON
✽To exit the setup mode
Use the ª cursor button to select “EXIT SETUP”, then press the ENTER button. It is also possible to quit by pressing the SETUP button on the remote control unit.
42