BWhen “SPEAKER CONFIGURATION” is selected, use the • and ª cursor buttons to select the speaker to be set then press the ENTER button.

•The type of speaker used for the front speakers, center speaker, subwoofer and surround speakers can be set. Use the • and ª cursor buttons to select the speaker type, then press the ENTER button.

LARGE

Select this when a large speaker is connected.

SMALL

Select this when a small speaker is connected.

NONE

Select this when no speaker is connected.

YES

Select this when a subwoofer is connected.

NO

Select this when no subwoofer is connected.

•When “CROSSOVER” is selected:

40 Hz, 60 Hz, 80 Hz (Factory default), 100 Hz, 120 Hz, set the frequency of crossover.

3 ✽ Press the RETURN button to return to the “SPEAKER SETUP” menu.

BWhen “CHANNEL LEVEL” is selected, use the • and ª cursor buttons to select the speaker to be adjusted, then use the 0 and 1 cursor buttons to set the level.

• TEST TONE

Use the 0 and 1 cursor buttons to select auto or manual. Adjust so that the volume of the test tones output from the different speakers sounds the same.

•The volume level output from the front speakers (left and right channels), center speaker, surround speakers (left and right channels) and subwoofer can be adjusted.

•The volume level can be adjusted between 0 and –10 dB in steps of 1 dB.

•Settings SW +10 dB to “ON” increases by 10 dB the volume level that is output from the subwoofer.

✽Press the RETURN button to return to the “SPEAKER SETUP” menu.

Remote control unit Remote control unit

SPEAKER SE TUP

SPEAKER CONF I GURAT I ON

F RONT

SP

L ARGE

CENT ER

SP

L ARGE

SUBWOOF ER

YES

SURROUND SP

L ARGE

CROSSOVE R

80Hz

SE L ECT : DEC I S I ON : ENTER BUT TON

Remote control unit

SPEAKER SE TUP

 

 

 

 

 

 

 

 

CHANNEL LEVEL

 

TEST

TONE

OF F

 

F RONT

L CH

0 dB

 

CENT ER

0 dB

 

F RONT

RCH

0 dB

 

SURROUND RCH

0 dB

 

SURROUND L CH

0 dB

 

SUBWOOF ER

0 dB

 

SW + 1 0 dB

OFF

SE L ECT :

DEC I S I ON : ENTER

BUT TON

48