wWhen “TV TYPE” is selected:

NTSC

Select this when your TV’s video format is NTSC.

If NTSC is selected, output format is fixed to NTSC.

PAL

Select this when your TV’s video format is PAL. If PAL is selected, output format is fixed to PAL.

MULTI (Factory default)

Select this when your TV is compatible with both the NTSC and PAL formats.

NTSC signals are output from the video output jacks when discs recorded in NTSC format are played, and PAL signals are output from the video output jacks when discs recorded in PAL format are played.

NOTE:

•If “TV TYPE” is set to a format other than a registered TV format, the image may no longer be smooth and the top and bottom of the image may be cut off.

eWhen “TV SYSTEM” is selected:

PROGRESSIVE (Factory default)

The audio signals are synchronized with the progressive output. (For component video output signals when “COMPONENT VIDEO OUT” at “VIDEO SETUP” is set to “PROGRESSIVE”)

INTERLACED

The audio signals are synchronized with the interlaced output.

(For video output and S-video output signals, as well as for

component video output signals when “COMPONENT VIDEO OUT” at “VIDEO SETUP” is set to “INTERLACED”)

3 HDMI/DVI

The audio signals are synchronized with the video signals output via the HDMI/DVI connectors.

OTHERS

Select this when you want to view both the interlace output/progressive output image and the HDMI/DVI output image at the same time.

The audio signals are set to the optimum timing for the interlace output/progressive output image and the HDMI/DVI output image. (Note, however, that the audio signals are not synchronized with the interlace output/progressive output image and the HDMI/DVI output image. To synchronize them, set to another position.)

rWhen “COMPONENT VIDEO OUT” is selected: (NOTE)

PROGRESSIVE (Factory default)

The signals output from the DVD-A1XV’s “COMPONENT VIDEO OUT” connector are formatted in the progressive format.

Select this when using the DVD-A1XV connected to a progressive type TV.

INTERLACED

The signals output from the DVD-A1XV’s “COMPONENT VIDEO OUT” connector are formatted in the interlaced format.

Select this when using the DVD-A1XV connected to an interlace type TV.

NOTE:

•For the component output only, it is possible to switch between interlace image output and progressive image output. It is not possible to specify progressive image output for the Video output connector or S-Video output connector.

Remote control unit

Remote control unit

V I DEO

SE TUP

 

 

TV ASPECT

 

 

TV

TYPE

 

NTSC

TV

SYSTEM

 

PAL

COMPONENT V I DEO

OUT

MUL T I

SQUEE Z E MODE

 

 

PROGRESS I VE MODE

 

 

AV1

V I DEO MODE

 

 

E X I T

SE TUP

 

 

 

SE L ECT :

DEC I S I ON : ENTER BUT TON

V I DEO

SE TUP

 

 

TV ASPECT

 

 

TV

TYPE

 

 

TV

SYSTEM

 

PROGRESS I VE

COMPONENT

V I DEO OUT

I NTERL ACED

SQUEE Z E MODE

HDMI / DV I

PROGRESS I VE MODE

OTHERS

AV1

V I DEO MODE

 

E X I T

SE TUP

 

 

 

SE L ECT :

DEC I S I ON : ENTER BUT TON

V I DEO

SE TUP

 

 

TV ASPECT

 

 

TV TYPE

 

 

TV SYSTEM

 

 

COMPONENT

V I DEO OUT

PROGRESS I VE

SQUEE Z E MODE

I NTERL ACED

PROGRESS I VE MODE

 

AV1

V I DEO MODE

 

E X I T

SE TUP

 

 

SE L ECT :

DEC I S I ON : ENTER BUT TON

44