Symptom |
| Check | Page | |
|
|
|
| |
Menu screen messages for the desired | • | Check the setting of “DISC MENUS” under “LANGUAGE SETUP” in “SETUP”. | 35~37 | |
language do not display. |
|
|
| |
|
|
|
| |
| • | Check the HDMI/DVI connection.(Check the status of the HDMI/DVI indicators.) | 25 | |
| • Check whether the connected monitor equipment or other equipment supports HDCP. (The | 20~22 | ||
|
|
| ||
An image is not projected with an | • | Check the settings of “HDMI/DVI SELECT”. | 63 | |
HDMI/DVI connection. | • | Check whether the output format of the | 20~22 | |
|
| format of the connected equipment. |
| |
| • | Check whether the video output setting at “PURE DIRECT” is set to “VIDEO OUT : OFF” | 57, 58 | |
|
| or “ALL OFF”. |
| |
|
|
|
| |
Picture and sound are interrupted with | • | When the “HDMI/DVI FORMAT” setting is set to “AUTO”, the picture or sound may be | 63 | |
| interrupted when cables are connected or disconnected or depending on the conditions of |
| ||
HDMI/DVI connections. |
|
| ||
| the connected device(s). |
| ||
|
|
| ||
|
|
|
| |
| • | Check that the batteries are inserted in the proper “<” and “>” directions. | 27 | |
| • | The batteries are dead. Replace them with new batteries. | 27 | |
Remote control unit does not operate. | • | Point the remote control unit at the remote control sensor when operating it. | 27 | |
• | Operate the remote control unit within a distance of 7 meters from the remote control | 27 | ||
| ||||
|
| sensor. |
| |
| • | Remove the obstacle between the remote control unit and remote control sensor. | 27 | |
|
|
|
|
90