31

Using
the Camera

30

1
3
2
1Set the Power switch to “w”.
2Press “d” or “c” to select the frame (file) to be
erased.
You can do the following in the erase confirmation
screen:
hTo select frames (files): “d” or “c”
hTo erase the displayed frame (file): “E” button
hReturn to single-frame playback: “T” button
Press the “W” button. An erase confirmation
screen is displayed.
●
!
Frames (files) labelled as “≤” must be
unprotected before being erased.
●
!
If “¬” is displayed for a frame (file),
DPOF settings have been specified for that frame (file). Press
the “E” button again to erase the frame (file).
0102
ERASING IMAGES (oERASE FRAME)
PLAYBACK MODE
Back (Cancel)
Erase
Previous frame
Next frame
Mistakenly erased frames (files) cannot be
recovered. Take care when erasing frames (files).
Copy important frames (files) that should not be
erased to a PC’s hard disk, etc.
After playback zoom has been used to adjust the area to be viewed, the image can be saved as a
separate file.
Use playback zoom to adjust the area to be viewed
(➡P.29).
■Saved image sizes
Trimming
1
Press the “E” button.
2
Check the size of the image to be saved and then
press the “E” button to save the image. Trimmed
images are saved as separate files in the final
frame.
3
You can switch back to single-frame playback mode at any time by pressing the “T” (™)
button.
The size of the saved image differs depending on
the zoom scale. If the size of the saved image is
less than 1MB, “∞” disappears on the display
panel and the image cannot be trimmed.
5To print at A4 size
3To print at A4/A5 size
2To print at A5/A6 size
1To print at A6 size
Playback zoom
Panning

VIEWING YOUR IMAGES (wPLAYBACK)

PLAYBACKMODE