61
Advanced
Features
60
11Set the Power switch to “w”.
2Press the “MENU/OK” button to display the
menu.
2Press “d” or “c” to select “i” PROTECT.
31Press “a” or “b” to select “SET ALL” or “RESET
ALL”.
2Press “MENU/OK” button to confirm your
selection.
RESET ALL
Removes the protection from all the frames (files).
SET ALL
Protects all the frames (files).
0102
Press the “MENU/OK” button to protect all the
frames (files).
SET ALL
0102

i

PROTECTING AND UNPROTECTING ALL FRAMES

PLAYBACK MENU
Protection is a setting that prevents images from
being accidentally erased. However, “FORMAT”
erases all images, regardless of a “SET ALL” setting
(➡P.74).
1
2
3
1Set the Power switch to “w”.
2Press the “MENU/OK” button to display the
menu.
1Press “d” or “c” to select “o” ERASE.
Press “a” or “b” to select “ALL FRAMES”.
2Press the “MENU/OK” button.
●
!
If you select “¡BACK”, the camera reverts to playback mode
without erasing the frames (files).
Press the “MENU/OK” button to erase all the
frames (files).
●
!
Protected frames (files) cannot be erased. Unprotect
protected files before erasing them (➡P.56).
If “…” appears, press the “MENU/OK” button again to erase the frame
(file).
0102
0102

oERASING ALL FRAMES

PLAYBACK MENU

◆To stop the procedure mid-way ◆

To cancel the ERASE ALL operation, press the
“BACK” button. Of the unprotected frames (files),
some frames (files) will be left unerased.
●
!
If the erase all operation is canceled immediately, some
frames (files) will still be erased.
Mistakenly erased frames (files) cannot be
recovered. Take care when erasing frames (files).
Copy important frames (files) that should not be
erased to a PC’s hard disk, etc.
Continued